6 burner gas bbq grill with side burner Gas Grill Regulator Troubleshooting

by:Longzhao BBQ     2019-11-05
6 burner gas bbq grill with side burner Gas Grill Regulator Troubleshooting
Before your big barbecue, you have turned on the grill to warm up, and to your dismay, you find that the grill is not heated at 250 degrees Fahrenheit or more than 300 degrees Fahrenheit.Although you have checked and confirmed that you have a whole tank of propane, the flame seems to be low.You may face one of several broad issues with regulators.The regulator on the gas grill is screwed on the parts of the propane tank to adjust the flow of the gas.It contains a security mechanism called bypass.This is a small piece of plastic, inside the regulator, which automatically turns off the gas supply if there is no back pressure in the hose.This often happens when there is a leak.If the gas tank is opened and one of the grill burners is opened, the bypass valve may also accidentally trip.Close all burners and gas tanks.Open the gas tank and wait for a moment before opening one of the burners and trying to ignite it.If your gas regulator keeps tripping, there may be a gas leak in your hose.Close the valve on the tank and remove the regulator and hose from the tank.Immerse the regulator in a solution of soap and water and reconnect the regulator and hose to the tank.Make sure the burner on the grill is in the "off" position and open the valve on the tank.If there is a leak in the regulator or hose, the soap bubble will indicate its position.Replace the regulator or hose if necessary.No user-The repaired parts inside the regulator cannot be repaired.If the above steps do not correct the situation or point you in the right direction, you will need to replace your regulator.You can purchase the regulator of a specific barbecue brand from an authorized retailer.Alternatively, common models can be found in most home and garden shops.The gas regulator is designed to be connected and detached from the gas tank by hand.Do not tighten or loosen the regulator using a wrench, as the regulator or tank may be damaged.If you have a stuck regulator, spray liquid lubricant on the thread before trying to loosen the regulator and allow the lubricant to penetrate for an hour.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...