allegheny technologies inc (ati) - stainless steel natural gas grill

Allegheny Technology Co. , Ltd (ATI)
Founded in August 26, 1999, the company is a manufacturer of professional materials and complex components.
The company operates through two business units: high performance materials and components (HPMC)
Flat roll products (FRP).
The company is engaged in the manufacture of differentiated special alloys and forgings.
Production of nickel by ATI
Titanium and Titanium based alloys and high temperature alloys
Base alloys, special alloys, stainless steel, zirconium and other related alloys in the form of various factory products.
Its capabilities range from Alloy Development to melting and heat
Component work done through design.
It is also engaged in the production of nickel.
Titanium based alloy
Base alloy powder for jet engine forgings and three-dimensional (3D)-
Printing products.
The company is engaged in the production of titanium-
Nickel base alloy
Base and cobalt
Base and high temperature alloys, and vacuum-
Melting special alloy for manufacturers and military jet engine components, as well as replacement parts for these engines.
It also produces titanium.
Vacuum base alloy
Melting special alloy and stainless steel alloy for commercial and military aircraft fuselage, fuselage components and missiles.
Titanium and Titanium-
Base alloys are used to produce jet engine components such as blades, discs and shells, as well as fuselage components such as structural components, landing gear, hydraulic systems and fasteners. Its nickel-
Base alloys, superalloys and special alloys are also used in aerospace and defense applications.
Typical aerospace applications of nickel
Base alloys, superalloys, and powder alloys include jet engine shafts, discs, blades, rings, and shells.
Its special alloys include vacuum-
Molten horse aging steel for aircraft landing gear and structural parts as well as jet engine parts manufacturing.
Titanium of the company-
Nickel base alloy
Base alloy and special alloy precision forgings are used for Components of jet engines, structural components for aircraft, helicopters, launch vehicles and other applications.
The company is also committed to providing constant temperature and heat-
Forging technology for aerospace components.
ATI offers a range of post-
Forging inspection, machining and finishing service.
Its Datalloy2 and DatalloyHP special stainless steel are used for non-
The magnetic drill collars enables directional and horizontal drilling techniques to be directed to the position required for the reservoir.
It has developed a series of twin alloys including ATI 2003 and ATI 2102 lean twin alloys for both submarine and deep water oil and gas applications.
Its professional materials are used in the power generation and distribution industry.
For power generation, the company's professional materials, including corrosion-
Alloy resistant (CRAs)
Used for coal, nuclear and natural gas applications. In coal-
In addition to the pollution control scrubber, its CRAs are also used for pipe, pipe and heat exchanger applications in water systems.
Its CRAs is also used in water systems, fuel cladding components and process equipment for nuclear power plants.
For the nuclear power plant, the reactor it produces
Grade zirconium and nium alloys for nuclear fuel cladding and structural components.
It offers large diameter nickel
Base high temperature alloy for natural gas land
Turbines for power generation.
Its alloys are used in solar, fuel cells, and geothermal applications for the generation of alternative energy sources.
ATI's professional materials are used in medical device products.
The company's zirconium-
Titanium-nband cobalt-
The knee, hips and other artificial limbs are made of base alloys.
Its bio-compatible nickel
Titanium memory alloy is used to support the collapsed or blocked blood vessels of the stent.
Its ultra-fine diameter (0. 002 inch/0. 051mm (mm))
The titanium wire is used for the screen to prevent the stop-bleeding block from entering the critical area of the body.
In addition, its titanium rods and wires are used to make surgical screws for bone repair.
Nickel for cars
Base alloy, stainless steel and other ATI professional materials for the manufacture of power systems and structural parts, exhaust systems and emission control components, washers, airbag inflator shells, windshield wipers and blades, components such as fuel system, fasteners, hose clamps, washers, etc. ATI's nickel-
Base alloys and special alloys for flat plates
Rolling products are used for engine and exhaust applications in the automotive market.
It also offers a range of heat
Corrosion-resistant-
Automotive exhaust alloy resistant.
High performance materials and components the HPMC division produces, converts and distributes a range of materials including Titanium and Titanium
Nickel base alloyand cobalt-
Base and high temperature alloys, zirconium and related alloys in the form of long products, including nium and nb, powder alloys and other special materials such as ingots, blanks, rods, wire shapes and rectangles, seamless steel pipes, as well as precision forgings, castings, components and machined parts.
These products are designed for the needs of terminal markets such as aerospace and defense, oil and gas, electric energy and medical care.
The company integrates these alloy systems during melting, re-melting, forging of rolling mill products, finishing, investment casting and processing.
The company competes with Berkshire Hathaway. , Arconic Inc.
VSMPO-Carpenter Technology
AVISMA and Aubert & Duval.
Production, conversion and distribution of stainless steel, nickel-
Base alloys, special alloys and titanium-
Base alloys produced in the form of various products, including sheet metal, engineering strip and precision rolling strip products.
Terminal market for its apartments
Rolling products are oil and gas, automobiles, food processing equipment and electrical appliances, construction and mining, electronics, communication equipment and computers, and aerospace and defense.
Stainless steel, nickel
Products based on alloys and titanium sheets are used in a range of industrial and consumer applications.
Engineering strip below 0 and very thin precision rolling strip products.
015 inch thick, customers mainly manufacture a range of products in the automotive, construction and electronics markets.
Stainless steel, nickel
It is mainly used in aerospace, corrosion and industrial markets.
The company competes with AK Steel Corporation, North American Stainless Steel, Outokumpu Stainless Steel usa llc, Aperam, Haynes International and VDM Metals Ltd.
Page 1000 15222: page 1412. 3942800F: 1302.