best kettle grills How to Stop the Leg from Falling Out on a Weber Kettle Grill

Weber kettle grill is probably the most widely used charcoal cooking equipment.In addition to being relatively cheap, their designs are easy to assemble and weather-resistant and require little maintenance.One of the only problems with the Weber kettle grill, especially with three-The leg assembly is that the legs will relax and start to fall off over time.
The best way to solve this problem permanently is by mounting the screws on each leg ring to the aluminum leg.Move the assembled grill to the horizontal open area and make sure the legs are inserted into the leg mounting ring as much as possible.Start from the front leg (leg without wheels) and find the dimples on the leg mounting ring.
It will go straight out on the side of the collar.Insert the hex screw into the drill bit and drive the drill bit, and align the screw tip so that it is located within the dimples of the leg mounting ring.When the drill bit is perpendicular to the leg assembly, the hex screw is driven by mounting the ring and leg until the gasket head is closely connected to the ring.
Move to any of the remaining two wheeled hind legs and Repeat steps 2 to 4