gas barbecue grill How to Build Your Own BBQ Barrel

Thank you for making this structure one of the best in 2009!#7 in the food category...Luckily, the last day I worked at the bakeryThe gallon honey bucket I 've been waiting for is finally empty.Being fired does not interfere with my dream of doing my own barbecue.First of all, I have to empty all the excess honey and clean up the honey inside (which is not exciting enough for a photo ).Then I borrowed a grinder from a friend and cut the opening.It's not that much trouble to have a food-grade bucket.Imagine a barrel of oil or fuel in the bucket.Yuck!I have to build a base and the only thing around is some old chainI 've never been to the link fence of the dump and some scrap plywood and I 've been demoted from a creepy room in the basement.I cut six columns of different lengths.The length of the barrel and the length of the leg.I think the BBQ is portable, so the best way is to have the bucket sitting in the stands.The two pillars support the barrel, while the 4 legs are connected by drilling holes at both ends for the support Bolt.To keep the legs strong, I fixed them with plywood.Put the barrel on it, it's tall and proud.I added brackets to fix the grill to prevent the lid from falling inside and also added a lower bracket to fix the coal and allow the air to flow.Be sure to buy stainless steel brackets and hinges.If you buy a galvanized product, you should take a flashlight to burn the smoke that you will have on your first barbecue.I lit a fire inside and burned any paint or coating or who knows what it is.There may or may not be a ban on burning this day, so I made a burger on the gas grill to cover up the smoke.The last step of the construction is to add the handles (ordinary wooden piles in hardware stores), vents and thermometers.I also decided to spray the bucket with high heat resistant pants.In addition to a slightly custom color, the paint helps to prevent rust on the barrel.The only thing left is to test it in a real environmentLife barbecue