long burning charcoal How to Burn a Tree Stump With Saltpeter

Removing stumps is not easy, but burning stumps with saltpeter is an effective way to make your front yard or lot look neat and tidy despite the time-consuming.Nitrate is an active ingredient in many chemical residual end remover, but this can also be done by directly adding nitrate or potassium nitrate.It takes a few months to burn the stump because the liquid used must be absorbed by the tree, but the end result is that the stump is cleaned up.
Drill a few 1-There are inches deep holes on the top and side of the stump.This number depends on the size of the stumps, but starts from 3 to 4 inch apart.Drill the side holes to tilt them down and not let the liquid overflow.
Fill each hole with about 5 ounces of salt and fill each hole with water.Let the stumps absorb chemicals for 4 to 6 weeks.Over time, you will notice that the stumps have softened.
Come back after 4 to 6 weeks and fill each hole with kerosene.Wait 4 to 6 weeks for the stump to absorb the liquid.Put a few burning charcoal coal balls on the stump and wait for them to burn at the root.
This can take a few days and should pay attention to charcoal.Add more charcoal if it looks like the fire is slowing down