stainless steel barbecue grill uk Painting Over Stainless Steel

The paint can be glued to all types of finishes.However, stainless steel presents cohesive problems due to its almost completely smooth surface.Painting on stainless steel needs to be prepared to ensure that the metal can keep a layer of paint in place.In general, you never want to apply the paint directly to the surface of polished stainless steel because it will never be combined with the surface.But if the surface you are working on, such as the countertop stainless steel, has countless wear marks due to years of use, you will be fine.If not, you will need to rent a sander to wear the metal surface so that the paint can stick together.Next, you need to make sure that the roughThe Up surface is completely clean and free of dirt, debris and grease so that the paint is properly bonded.Ordinary soap and water will not cut it here;You will need to use a skim and a dedicated steel cleaner.According to the manufacturer's instructions, dry the time on any cleaner used.Before you can apply the last layer of paint in the color you want, you must apply a primer to the stainless steel.The primer coating has special adhesives that help them keep the paint on the surface.Any type of primer can be used with stainless steel, as can the final paint of your choice.Most paint manufacturers have a primer designed for finish paint, so for the best results, please follow the manufacturer's advice on the brand.To get a uniform coating, use a spray machine instead of a brush, which will leave the ridge behind.Again, if you use a paint sprayer to apply the last layer of paint on the primer coating, you will get the smoothest result once it is fully dry.If you like the ridges and roughness provided by the brush, feel free to use it for the application of the final color.You can also use a sponge or rag if you are looking for a different texture.When using a sprayer, keep the nozzle at least 12 to 18 inch from the metal surface and use a wide mist instead of a concentrated airflow to avoid dripping.If you are using a brush, you can use the stroke crazily in the direction you want the brush's "texture" to dry.You can also use paint rollers if you have a surface wide enough.Roll it like any other surface.