the grill rust Choosing and using spray paint

by:Longzhao BBQ     2020-03-16
the grill rust Choosing and using spray paint
Painting with a brush can be time consuming, but you can take advantage of painting a jar that is often overlooked to complete the task in record time.Painting is no longer what it used to be, and manufacturers have developed high-quality recipes that are easy to apply.The new spray paint has fast drying time and excellent durability, including rust prevention.But first of all, put some knowledge in your pocket before you go to the hardware store: Choose the right paint for the right work enamel: enamel is perfect for appliances, metal cabinets and outdoor tables, provides a hard finish.Use for touch-Ups or re-recording.Plastic: mailboxes, lawn chairs, and other plastic items such as flower pots can be completed in an hour or two, and colors can be mixed for decorative effects.High temperature: it is best to use on a grill, stove, or radiator, but not on the internal surface exposed to the Flame (which means applying it to the outside of the grill, not the inside of the grill ).Blackboard: blackboard spray can be used to clean poster boards, metal or wood and other types of surfaces in addition to the children's roomerase finish.Scrub: create the appearance of etched glass on the mirror or door, and can match the template for a custom decorative look.Finish Coating: The Lacquer can be applied in a variety of coatings to provide a high gloss finish for all types of items-looking particularly stunning on the furniture.Polyurethane coating can be used for stains or as a protective coating (glossy, semi-glossy)Glossy or satin ).Professional: painting can be found in other types of finishes, including metal, reflective, antique or stone, and patinas such as verdigris, hammered or rust.Many brands have nozzles designed to maximize consistent production and minimize the risk of dripping water.You can buy a handle for just a few dollars and it will be stuck on the jar to reduce the pressure of the hand and increase the control.Most importantly, a primer is not required for several finishes and can be applied directly to a clean and dry surface.However, you can find one if you do need prime-No rough coat primer that allows you to skip the pre-Front polishing-coating.Manufacturers continue to work on low developmentBut at present, most of them are quite smelly and need appropriate safety measures.Masks or respirator and protective glasses are recommended.Paint well-Ventilation area, preferably outdoors.If you need to paint indoors, open the window and close the door to control the smell.Do not spray paint in children, pets or enclosed spaces with poor ventilation!If you are reading this article because you are interested in marking, please note this warning: marking can be dangerous.Would you like to hear a daunting story?On 2009, a man was killed while marking a California highway.The L.A.After the painter finished painting, he tried to cross the highway.He did not cross the highway.Let this be your lesson, as mom said.Expert results prompt 1.Prep well!Clean items to be painted, washed and dried.If the item is seriously rusted, light sand mostly rusts and provides gold for the worst areas.2.Painting development for project-Specific: choosing the right type is one of the keys to success.Carefully follow the manufacturer's instructions and pay attention to the recommended drying time between the coating surface preparation and the coating.3.Consider building a homeMake a paint spray room to accommodate spills: this can be as simple as building a cardboard box on top, bottom and three sides, or a small frame surrounded by plastic binding in place.Otherwise, choose an external location with windThe spots that break this dust won't be embedded in wet paint-the garage is perfect!4.Spray in a short period of time to minimize excessive spray and drop, slightly overlapping from one side to the other.Applying for a lighter coat is better than applying-handed.Let the paint dry well between the coatings.5.Handle large items such as furniture in sections.6.Plastic pieces use plastic primer: for plastic items such as lawn chairs and mailboxes, use the recommended plastic primer and prepare the new surface by cleaning it with alcohol or paint thinners.Laura Foster-Bobroff wrote it for Networx.Get family and garden ideas like this on Networx.com.View the original post.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...