where to buy charcoal for bbq How to Re-Porcelain a BBQ Coating

After years of using the grill, the grill will become an old friend you can't stand ---Even if the porcelain coating of your grill starts to break.Luckily, you don't need to buy a new grill.High-heat, easy-to-The hardware store offers ceramic painting specially designed for grilling.
With a few steps, your grill will look brand new and ready for more years of BBQ.The hygiene of the barbecue.Empty the charcoal (make sure it's cool) into the plastic bag and discard it.Rinse the barbecue with a garden hose.Spread the newspaper on the grass and put the barbecue on the newspaper.
Spray oven cleaners to remove grease from the inside of the grill, grill and lid.Follow the instructions and allow to sit until the heaviest grease softens.Scrub the grill with a barbecue wire brush.
Wear plastic gloves and wipe the inside and lid of the barbecue with a paper towel.Remove residual grease using steel wool.Squeeze the soap onto the wet sponge.Wash the barbecue inside and outside with a sponge and rinse it clean.Dry and wipe with alcohol and paper towels to remove any remaining residue.
ProtectionThe porcelain part of the barbecue is covered with paintSpray with painter tape and newspaper.Brush any rust with steel brush.Gently polish the grill with fine sandpaper, inside and outside, including the lid.BBQ bowl and lid with high sprayHot metal primer spray to prevent rust.
Allow drying according to direction.
Spray a layer of barbecue paint on the outside of the barbecue, using a uniform, continuous pass.Repeat inside the grill.Allow drying according to direction.Repeat the process at least twice.Apply extra light paint before the BBQ has professionalLooks like the gloss you want.Allow to dry.Lay the newspaper on the ground and put two-by-4 S in the newspaper about 8 inch metres apart.
Put the barbecue cover in 2-by-4S and apply paint as shown in step 5.Open the lid and paint the top of the barbecue cover.Repeat the process, when you apply to the BBQ bowl, apply as much paint as possible on the BBQ cover.
Let the paint dry completely.
After 48 hours of healing porcelain, ignite your old friend again and enjoy it