bbq grills - tips to clean your gas grill

Tips for cleaning the BBQ gas grill cleaning the bbq gas grill does not need to be a tedious and annoying job.
Here\'s a guide on how to keep spic and span.
The first thing you should do is read and understand the owner\'s manual.
This will make sure you know what to do and shouldn\'t do to clean your particular model of grill.
Now you are ready to clean the grill.
Brush the grill and do this for about 10 seconds after you remove the food from the grill.
Then turn off the grill.
Once the heat fades, spray vegetable oil on it.
This keeps the equipment well lubricated.
Another maintenance procedure is to heat the grill for about 10 minutes.
In order for your BBQ gas equipment to work perfectly, you must clean the burner occasionally.
Check the color of the flame every time you use it.
If the flame is red or orange, it means that the burner needs to be cleaned.
Insert the wires into the burner holes to clean them.
If you spray the skim regularly, keep it for a while.
After that, the barbecue completely stopped.
Make sure that there is no blockage in the Wenchang tube.
Clean them using a pipe cleaner.
Also check if there is a leak in the gas tube.
You can do this by spraying soapy water on the tube.
The presence of bubbles will indicate a leak.
Replace any leaked parts immediately.
Clean the interior of the grill gas equipment by scraping the residue.
Then use the soft wire brush to clear loose debris.
The exterior of the grill is best cleaned before the grill is completely cooled.
Wash with warm water and mild detergent.
Follow up with hot water flushing.
Following the above cleaning procedure, you will be able to keep the bbq gas grill in the best working condition.