Latest products
Cleaning steps for smokeless barbecue truck electric field
by：Longzhao BBQ
2021-03-08
With the continuous and rapid development of society, people are paying more and more attention to environmental protection. For the smokeless barbecue truck, its appearance reduces the emission and pollution of oil fume, so it is deeply loved by manufacturers and people. However, as time goes by, the machine will accumulate dust, especially for this equipment, because it is a barbecue, it is inevitable that it will be stained with dirt such as oil stains. So everyone may have questions, how to clean the smokeless barbecue truck? In fact, the main part that needs to be cleaned is the electric field of the barbecue truck. Rinse the other surfaces with water and wipe them. So today, the editor will focus on explaining the cleaning steps for everyone.
1. Work preparation: rubber gloves, electric field cleaning water tank, high-pressure water gun, caustic soda, protective glasses, cleaning tools, water shoes, screwdriver.
2. First, you need to cut off the power supply and turn off the equipment.
3. After confirming that the power supply is completely disconnected, open the inspection door of the smokeless barbecue truck.
4. Touch one end of the electric field with a screwdriver to release the residual power. At the same time, short-circuit the electric field separator to release the residual power.
5. Use a copper screwdriver to remove the connection between the power line and the electric field.
6. Take out the electric field and wind network of the smoke-free barbecue truck.
7. Pour hot water above 70 into the cleaning tank, and then add caustic soda. Pay attention to the operator to wear gloves and protective glasses.
8. Put the electric field and the wind net in order for cleaning, and soak them in water.
9. After cleaning with a cleaning tool, take it out and put it on a flat ground, and use a high-pressure water gun to spray the smokeless barbecue car electric field.
10. After drying, restore the purification system device.
11. Close the inspection door to make the equipment enter the normal state.
The above is all about the cleaning steps of the smokeless barbecue car electric field. I hope everyone must pay enough attention to the cleaning of the equipment.
1. Work preparation: rubber gloves, electric field cleaning water tank, high-pressure water gun, caustic soda, protective glasses, cleaning tools, water shoes, screwdriver.
2. First, you need to cut off the power supply and turn off the equipment.
3. After confirming that the power supply is completely disconnected, open the inspection door of the smokeless barbecue truck.
4. Touch one end of the electric field with a screwdriver to release the residual power. At the same time, short-circuit the electric field separator to release the residual power.
5. Use a copper screwdriver to remove the connection between the power line and the electric field.
6. Take out the electric field and wind network of the smoke-free barbecue truck.
7. Pour hot water above 70 into the cleaning tank, and then add caustic soda. Pay attention to the operator to wear gloves and protective glasses.
8. Put the electric field and the wind net in order for cleaning, and soak them in water.
9. After cleaning with a cleaning tool, take it out and put it on a flat ground, and use a high-pressure water gun to spray the smokeless barbecue car electric field.
10. After drying, restore the purification system device.
11. Close the inspection door to make the equipment enter the normal state.
The above is all about the cleaning steps of the smokeless barbecue car electric field. I hope everyone must pay enough attention to the cleaning of the equipment.
Custom message
