Cleaning up the electric field of smokeless barbecue truck
by：Longzhao BBQ
2021-03-08
In order to ensure the normal operation of the smokeless barbecue truck, it is necessary to clean the electric field of the barbecue truck regularly. The cleaning method of the smokeless barbecue truck electric field is relatively simple, and you can clean it correctly according to the following steps.
1. Work preparation: electric field cleaning water tank, caustic soda, electric field cleaning tools, rubber gloves, water shoes, glasses and screwdriver.
2. Cut off the power and turn off the equipment.
3. Confirm that the power supply is completely disconnected, and open the access door of the smokeless barbecue truck.
4. Touch one end of the electric field with a screwdriver to release the remaining power. At the same time, the electric field separator is short-circuited to discharge the remaining electricity.
5. Remove the power cord from the copper screwdriver and connect it to the electric field.
6. Smokeless barbecue truck takes out the electric field and wind power network.
7. Pour hot water above 70℃ into the cleaning tank, and then add caustic soda (operators wear gloves and protective glasses).
8. Put the electric field and wind net into the cleaning in turn.
9. Soak in water
10. Clean it with cleaning tools, take it out and place it on the ground, and spray the electric field.
11. Recovery and purification system device after drying.
12. Close the maintenance and make the equipment enter the normal state.
12. After each use of the barbecue cart, clean the surface of the steel plate, wipe off water and oil, and keep the surface of the steel plate smooth.
Warning: It is forbidden to pour garbage, oil, sewage and other debris into the flue under the stainless steel range hood of the smokeless barbecue truck to prevent the flue from being blocked; the air duct should be cleaned regularly to ensure that the air duct is unobstructed.
Clean the stainless steel range hood, garbage drawer and leaking tank of the barbecue truck before get off work every day. After cleaning the barbecue truck, put a small amount of salad oil on the work surface and wipe it with a scouring pad until the light appears; after wiping the scouring pad, clean the work surface and apply a small amount of salad oil. The above is the cleaning procedure of the smokeless barbecue truck.
1. Work preparation: electric field cleaning water tank, caustic soda, electric field cleaning tools, rubber gloves, water shoes, glasses and screwdriver.
2. Cut off the power and turn off the equipment.
3. Confirm that the power supply is completely disconnected, and open the access door of the smokeless barbecue truck.
4. Touch one end of the electric field with a screwdriver to release the remaining power. At the same time, the electric field separator is short-circuited to discharge the remaining electricity.
5. Remove the power cord from the copper screwdriver and connect it to the electric field.
6. Smokeless barbecue truck takes out the electric field and wind power network.
7. Pour hot water above 70℃ into the cleaning tank, and then add caustic soda (operators wear gloves and protective glasses).
8. Put the electric field and wind net into the cleaning in turn.
9. Soak in water
10. Clean it with cleaning tools, take it out and place it on the ground, and spray the electric field.
11. Recovery and purification system device after drying.
12. Close the maintenance and make the equipment enter the normal state.
12. After each use of the barbecue cart, clean the surface of the steel plate, wipe off water and oil, and keep the surface of the steel plate smooth.
Warning: It is forbidden to pour garbage, oil, sewage and other debris into the flue under the stainless steel range hood of the smokeless barbecue truck to prevent the flue from being blocked; the air duct should be cleaned regularly to ensure that the air duct is unobstructed.
Clean the stainless steel range hood, garbage drawer and leaking tank of the barbecue truck before get off work every day. After cleaning the barbecue truck, put a small amount of salad oil on the work surface and wipe it with a scouring pad until the light appears; after wiping the scouring pad, clean the work surface and apply a small amount of salad oil. The above is the cleaning procedure of the smokeless barbecue truck.
Custom message
