How to buy a smokeless barbecue table

With the advent of summer, barbecue has become a mainstream delicacy in summer. Of course, the use of smokeless barbecue tables is indispensable for the enjoyment of its cuisine, but the selection of its equipment is also very important. In order not to be deceived, we will consider its quality Identify the method to understand.
　　, to see if the materials are reasonable
　　 Different smokeless barbecue tables have different surface materials. For example, the legs of tables, chairs and cabinets must be made of hard wood, which is relatively strong and load-bearing, while other materials can be used for the internal materials; the thickness of the legs of the wardrobe must reach cm. If it is too thick, it will appear awkward. The cabinets in the kitchen and bathroom should not be made of fiberboard, but should be made of plywood, because the fiberboard will expand and be damaged when exposed to water; the dining table should be washable. It is found that the wood has insect eyes and foam, indicating that the drying is not complete.
　　, see if the four legs of the table are flat
　　 This point is just a moment when you put it on the ground, and some barbecue tables only have three legs on the ground. Check to see if the table top is straight, not bowed or collapsed. When the table top is raised, the glass plate will rotate when placed; the table top is recessed, and the glass plate will break when placed on it.
　　, whether the structure of the smokeless barbecue table is firm
　　 Chairs, stools, hangers, etc. can be dragged on the concrete floor when selecting, and the sound is clear and crisp, indicating that the quality is better; if the sound is dumb, there is a murmur, indicating a mortise The combination is not tight and the structure is not strong. Writing desks and tables can be shaken by hand to see if they are stable. You can sit on the sofa for a while. If you sit on it, it will creak and sway. It will be nail work and it will not take long. There should be four triangular clips on the legs of the square table, bar table, chair, etc., for fixing purposes. When choosing the table and chair, you can turn the table and chair upside down to have a look. The cloth-covered chair can be touched with your hand.
　　, the moisture content of wood is not more than%
　　The moisture content of the barbecue table is not more than %. If the moisture content is high, the wood is easy to warp and deform. Generally, consumers who do not have test equipment when buying, can use the method of hand touch, touch the bottom of the barbecue table or the unpainted place inside, if it feels damp, then the moisture content is at least more than %, which is not usable at all.
　　, look at the veneer and the seams are not strict
　　 Whether it is pasting wood veneer, PVC or pasting pre-painted paper, pay attention to whether the leather is smoothly pasted, whether there are bulges, blisters, and loose seams. When checking, look at the light, you can’t see it if you don’t. Fraxinus mandshurica veneer barbecue table is relatively damaged, and generally only lasts two years. As far as wood veneers are concerned, planed veneers are better than peeled veneers.
　　 In short, when purchasing a smoke-free barbecue table, you can refer to the above to judge the material of the smoke-free barbecue table. At the same time, don’t blindly trust the salesperson. You have to pass your own judgment and compare with many others. Integrate the information obtained to make a purchase.