Reasons for cleaning the smokeless grill

Smokeless barbecue grills can be regarded as a modern fashion trend, and its environmental protection and practicality have always been the top priority of people’s attention, but sometimes there will be some problems in the process of use. In order to ensure the normal use of the equipment, we need to check it in time. Cleaning and maintenance, in order to be able to repair quickly, it is necessary to understand the reasons.
　　 There is a problem with the smokeless barbecue grill. When the purifier is working normally, the electric field emits a slight continuous and steady 'chi' static discharge sound, the green light is off, and the red light is on. When the purifier is working, occasional 'pop, pop' high-voltage discharge sound occurs, which is normal. When the purifier is in use, the green light will turn off and on, and the red light will also be on, which indicates that the purifier needs to be cleaned.
　　 If it is not cleaned, the purifier will automatically distinguish and enter the protection state. When the purifier is in use, the red light is on and the green light is off, which indicates that the purifier has entered the automatic protection state and stopped working. After cleaning the electric field, the purifier can enter the normal working state. When the electric field is working normally, check whether the polarity of the electric field is reversed. There is a slight noise when the electric field is working, and there is a problem with the high-voltage module. Replace it. There is a lot of dirt on the electric field, so it can be removed. The high voltage generating module is damaged. The input power is normal and the delay circuit is normal. After the delay, there is no sound in the electric field, the fault light is on, and the reset circuit continues to operate, indicating that the high-voltage module is damaged and needs to be replaced. The reset switch of the fault protection module is in the final protection state, and the electric field is short-circuited to clear the short-circuit point. Too much fouling in the electric field requires cleaning.
　　 When the smokeless grill fails, first check whether the equipment needs to be cleaned to avoid equipment failure due to failure to clean in time. At the same time, when purchasing the equipment, ask the merchant to understand the cleaning method and cleaning time, and clean it in time.